Factory Preload ListUpdated a year ago
There may be times when a product needs to have its factory sounds and settings restored. This data is also known as factory preload.
The table below explains how to reload these settings on various legacy products.
Product | How to reload factory settings |
01/W Series | Global screen 7 Press G then E |
03R/W | Global screen 5D, then select “OK”. |
05R/W | Global Screen 5A, then select “OK”. |
168RC | Factory data must be transmitted and returned via SysEx dump. |
A1 | Card Load only from a SPC0A1 (Card no longer available) |
A2/A3 | Hold Up and Down arrows while turning it on. |
A4 | Hold Bank Up and Write while turning it on. PL appears, press write again. |
A5 | Hold Mode Footswitch and Write while turning it on. Press Footswtich 1, F is dispayed on screen. |
AX1000G | Hold Bank footswitch and Exit button while turning it on. Press Write button to load the factory programs. |
AX100G | Hold FX Select and EXIT button while turning it on. Press write button. |
AX1500G | Hold down Bank footswitch EXIT button while turning it on. Then press Write button. |
AX1G/B | Hold down the left arrow key and the "+ " while powering on. Then press the "+" button again. |
AX300G/B | Hold Param/Value and Compare/Write while turning it on. Then Compare/Write once again. |
C-Series | Disk Load C900 (CFD01P) Ci86/9600 (CID00PE ) |
CX-3 | Hold Program 2 and 7 while turning it on. |
D Series | Backup CDs |
EX8000 | Audio from restore tape |
G3 | Hold Bank and Write while turning it on. Release both and then press Write again. |
i1/i2/i3 | Disk Load (IFD01P for i3 and i2, IFD02P for i1) |
I30 | Disk Load (I30FD00P) |
i5S/M | Disk Load (IFD00P) |
iS35/40/50/B i40M | Disk Load (IFDD1006 except for iS40 and i40M which is IFDD1007) |
iX300 | Disk Load (IXD00P) |
KAOSS Pad | N/A |
KARMA | Disk Load (KMFD00P) |
M1 | Card Load (MPC00P) or SysEx dump. See instructions for SysEx dump. |
M1R/M1REX | Card Load (MPC00P, MPC0EX for EX model) |
M3R | Global screen 5D “OK”, then select "OK." |
MS2000/2000R | Global screen 2D, then select "OK". |
N1/N5/EX | Press Utility, select "Factory Reset" then press Enter. |
N1R | Press Global, Page > to Init. Select "Factory Preload" then press Enter. |
N364/N264 | Disk Load (NSD3) |
NX/NS5R | Enter button, then select Utility, Preset, Factory Preset, Yes. |
PA80/60 | Disk Load (6 disk set) |
Prophecy | Global screen 19, press Enter. |
PX1 | Metronome and Enter buttons while powering on. Then press the "+" button. |
PX2 | Rhythm and Enter buttons while powering on. Then press the "+" button. |
PX3/PX3B | PX3: Rhythm/Aux and "+" button while powering on. Then press the Bypass/Tune button. PX3B: HBB and "+" button while powering on. Then press Bypass/Tune. |
PX4/PX4B | PX4: Rhythm and UP arrow buttons while powering on. Then press Enter/Rec. PX4B: Rhythm and Up arrow buttons while powering up. Then press press Enter/Rec. |
S3 | Hold Stop and S1 while turning it on. |
SG Rack | Global screen 7, then select "OK". |
SGPROX | Program Edit mode screen 14 (Each program!) |
SP500 | Function screen 7. |
T Series | Disk Load (TSD00PII) |
Trinity Series | Disk Load (TFD00P and TFD01P) |
Triton Classic/ST | Disk Load (TNFD00P and TNFD01P for Classic, Hard Drive contains preload for Studio) |
Triton LE | Global mode, F8, Select "Preload" then OK |
Triton Rack | Disk Load (TNRFD00P and TNRFD01P) |
TR Rack | Global screen 10, then select "OK". |
WS/WSEX/AD | Card Load (WPC00PI, II and III) |
WSSR | Card Load (WPC00PI, II and III) |
X2/X3/X3R | Disk Load (XSD00P) |
X5/X5D/DR | Global Screen 5A, then select “OK”. |
Z1/Z1EX | Preload screen in global mode. |